| Warranty: | 3-5 Years |
|---|---|
| Light Source: | LED Lamp |
| Lamp Body Material: | Aluminum |
| Light Type: | Solar |
| Power: | 120W |
| Illumination Time: | 6h |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
|
Model No. |
PL-SSL-017A/B |
||
|
Light Source |
60W |
80W |
100W |
|
Capacity |
LiFePO4 Lithium battery 12.8V 30AH |
LiFePO4 Lithium battery 12.8V 45AH |
LiFePO4 Lithium battery 12.8V 54AH |
|
Solar Panel Power |
18V 60W |
18V 80W |
18V 100W |
|
Solar Panel |
high efficiency monocrystalline |
||
|
LED Chip |
Bridgelux COB/ SMD 5050 |
||
|
Product Size |
878*383*84.5mm |
1118*383*84.5MM |
1323*383*84.5 mm |
|
Charging time |
6-7 hours(strong sunshine) |
||
|
Working Time |
12 hours per day for 3-4 rainy days |
||
|
Luminous Flux |
150lm/w |
||
|
Lighting Angle |
80 X150° |
||
|
Color Temperature |
3000k-6500k |
||
|
Main Materials |
Aluminum alloy + galvanized iron |
||
|
Packing size |
930*435*110mm (Lamp) 370*205*335mm (Sleeve) |
1170*435*110mm (Lamp) 370*205*335mm (Sleeve) |
1375*435*110mm (Lamp) 370*205*335mm (Sleeve) |
|
Recommended Mounting Height |
6-7m |
7-8m |
8-9m |
|
Recommended Mounting Distance |
20-25m |
20-25m |
20-25m |
|
Model No. |
PL-SSL-017A/B |
|
|
Light Source |
120W |
150W |
|
Capacity |
LiFePO4 Lithium battery 12.8V 60AH |
LiFePO4 Lithium battery 12.8V 90AH |
|
Solar Panel Power |
18V 120W |
18V 150W |
|
Solar Panel |
high efficiency monocrystalline |
|
|
LED Chip |
Bridgelux COB/ SMD 5050 |
|
|
Product Size |
1428*383*84.5mm |
1598*383*84.5mm |
|
Charging time |
6-7 hours(strong sunshine) |
|
|
Working Time |
12 hours per day for 3-4 rainy days |
|
|
Luminous Flux |
150lm/w |
|
|
Lighting Angle |
80 X150° |
|
|
Color Temperature |
3000k-6500k |
|
|
Main Materials |
Aluminum alloy + galvanized iron |
|
|
Packing size |
930*435*110mm (Lamp) 370*205*335mm (Sleeve) |
1170*435*110mm (Lamp) 370*205*335mm (Sleeve) |
|
Recommended Mounting Height |
9-10m |
10-12m |
|
Recommended Mounting Distance |
25-30m |
25-30m |
The working time will be affected by the surroundings.
The following are tips and directions for LED solar street light, please pay attention.
1."LED solar street light" could not work without sunshine, pleaseselect the suitable model according to the local sunshine radiation and the annual total radiation.We suggest use the both AC and DC charging model in those places where lack of sunshine or have long-time rainy days.
2."LED solar street light" adopts the long life Lithium battery for storing energy, charging temperature at day time is between: 0°C~+60°C,when temperature goes lower than 0°C ,the control system will stop automatically to protect the battery, and it will revive to charge the battery while temperature goes higher than 0°C. Discharging temperature at night is between: -20°C~+60°C, any ambient beyond will take damage to the battery. So please check these factors while selecting the street light.
3.Battery of the "LED solar street light" can be stored for 6 months long after fully charged. Therefore please examine and charge it periodically after long time transportation or storage to prevent damaging.
4.When you install the lights in Northern Hemisphere, please adjust the solar panel to the South as much as possible to collect maximum sunshine radiation, while install them in Southern Hemisphere, By the same token, keep solar panel to north. At the same time please keep it away from any shadow of houses, trees etc.
5.Keep clear of the surface of the LED solar street light with normal detergent to get maximum power generation, clear the dust or tree leaves or any grease.
6LED solar street light have got the standard of IP65.The vents on the surface is designed for radiating.The materials are made of aluminum alloy which can survive in the environment of seaside and desert.
7.Please turn on the switch when using.
Installing Directions:
1.To place the light pole into the best spot with good day lighting . The light pole should be the length 3-5m, the thickness 2.0mm with material iron or steel, the diameter 40-100mm.
2.Please check if the components are all here when open the packing, the components are show below.
3.Please turn on the switch before using.
4.Place the lamp on the pole by its sleeve,and make sure it is steady,then it is OK.
We have right to improve the structure of our products without any special notice. If there is anything different from data here, please follow what it is.We guarantee that we have done what we can to improve the contents of the instruction, so we will not assume any loss of this.
Applications:
Company Information:
FAQ:
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 1-3days, mass production time needs 1-2 weeks for order quantity more than
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, we offer 2-7 years warranty to our products.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}